遙控器

Remote control

當車庫門的遙控器沒有反應，但是通過車庫門的密碼鎖能打開車庫門時，您可能需要更換您家車庫門遙控器的電池了。

When the remote control of the Garage door does not respond, but the Garage door can be opened through the Combination lock of the Garage door, you may need to replace the battery of your Garage door remote control.

如果換完電池后還是沒有反應，在這種情況下，你可以使用梯子，按住車庫開啟器上的“Learn”按鈕。

If there is still no response after replacing the battery, in this case, you can use a ladder and press and hold the "Learn" button on the garage opener.

這樣您的車庫開門器會尋找一個新的遙控器訊號，這時按下遙控器上的按鈕，這樣開門器就能和遙控器的信號組合起來，然后開門器就會存儲新的代碼。

In this way, your garage door opener will search for a new remote control signal. At this time, press the button on the remote control, so that the door opener can be combined with the signal from the remote control, and the door opener will store the new code.

車庫門密碼鎖

Garage door Combination lock

很多車庫門密碼鎖都是安裝電池的，但是很多人會忘了這點，當您想通過密碼鎖打開車庫門時沒有反應，那么可能是密碼鎖沒有電了，需要更換電池。但如果更換電池沒有效果，你也可以按照密碼鎖的的用戶手冊上的說明重新設定。

Many Garage door Combination lock are equipped with batteries, but many people will forget this. When you want to open the Garage door through the Combination lock, there is no response, then it may be that the Combination lock has no power, and the battery needs to be replaced. However, if replacing the battery does not work, you can also reset it according to the instructions in the user manual of the Combination lock.

檢查車庫門軌道

Check the Garage door track

車庫門兩側的滾輪軌道應該是直的，沒有任何障礙物。如果軌道彎曲或堵塞，則在車庫門在開啟和關閉時會很困難。

The roller tracks on both sides of the Garage door should be straight without any obstacles. If the track is bent or blocked, it will be difficult to open and close the Garage door.

磨損跡象

Signs of wear and tear

濟南卷簾門安裝人員提醒，如果有許多黑色的塑料屑或刨花在您的車庫門開啟器齒輪的頂部，這表明上面的鏈條和鏈輪磨損過度。如果只有少量的塑料屑則不用擔心，您可以看一下齒輪和鏈條。

The installer of Roller shutter in Jinan reminded that if there are many black plastic chips or shavings on the top of the gear of your Garage door opener, it indicates that the chain and sprocket on it are excessively worn. If there is only a small amount of plastic shavings, don't worry. You can take a look at the gears and chains.

如果鏈條下垂，有可能是繞得太緊了，電機部件頂部的鏈輪斷裂。檢查內部的部件，以確保齒輪沒有剝離。如果您需要新的齒輪或鏈輪壞了，則您可以直接更換一個新的車庫門開啟器。

If the chain sags, it is possible that the winding is too tight and the sprocket at the top of the motor component is broken. Check the internal components to ensure that the gears are not peeling off. If you need a new gear or the sprocket is broken, you can directly replace it with a new Garage door opener.

如果當開啟車庫門的時候，車庫門只升起3寸左右，然后又自動落下無法完全打開。遇到這種情況，您可以檢查一下車庫門上面的彈簧，看看是否有斷裂的情況。更多相關事項就來我們網站http://m.99feipin.cn咨詢！

When opening the Garage door, the Garage door will only rise about 3 inches and then fall down automatically and cannot be fully opened. In this case, you can check the spring on the Garage door to see if it is broken. For more related matters, come to our website http://m.99feipin.cn consulting service