實際上在安裝完快速門之后，還是需要進行相關的檢查，為確?？焖倬砗熼T(mén)的使用性能的穩定性和使用性能，快速門的用戶需要定期對性能進行檢查，才能保障快速卷簾門的正常使用，接下來濟南卷簾門廠家馬上為大家介紹下如何進行性能檢查，需要注意哪些方面呢？

In fact, after the installation of the fast door, it is still necessary to carry out relevant safety inspections. In order to ensure the stability and safety of the use performance of the fast roller shutter door, the users of the fast door need to check the safety performance regularly in order to ensure the normal use of the fast roller shutter door. Next, Jinan roller shutter door manufacturer will immediately introduce to you how to carry out the safety performance inspection and what aspects need to be paid attention to?

一、力量檢查

1、 Strength check

使用遙控器關上快速卷簾門，若人員手動操作，快速門的開門器馬上倒轉，則說明快速門額開門器力量正常，否則就表示力量過大，需要調整開門器的力度，避免影響正常使用。

Use the remote control to close the fast shutter door. If the personnel operate it manually, and the door opener of the fast door immediately reverses, it means that the power of the fast door opener is normal and safe. Otherwise, it means that the power is too large, and the power of the door opener needs to be adjusted to avoid affecting the normal use.

二、倒轉檢查

2、 Reverse check

放置一塊5cm高的木塊在快速門底部，使用遙控器關上快速門，快速門輕碰到障礙物木塊時，會馬上倒轉開門器。這是快速門的開門器的邏輯控制板在關門時監控著電機的電流，當啟閉門遇到阻力時，電機會增大電流，開門器就會反方向運作以保障使用。

Place a 5cm high wooden block at the bottom of the fast door, and use the remote control to close the fast door. When the fast door lightly touches the wooden block of an obstacle, it will immediately reverse the door opener. This is the logic control board of the door opener of the fast door, which monitors the current of the motor when closing the door. When the door meets resistance, the motor will increase the current, and the door opener will operate in the opposite direction to ensure safety.

快速卷簾門

Fast shutter door

三、平衡檢查

3、 Balance check

快速門的彈簧系統主要作用是平衡快速門的重量，在進行平衡檢查快速門時，需要先將紅色離合器設置脫離狀態，這時手動操作快速門門不需要很太大的力，將門體到1.5米處左右再慢松手，檢查快速門在彈簧的作用下是否可以處于無重狀態，確保性能。

The spring system of the fast door is mainly used to balance the weight of the fast door. When checking the fast door for balance, it is necessary to set the red clutch to the disengaged state first. At this time, it does not need too much force to manually operate the fast door. Move the door body to about 1.5 meters and then slowly release it. Check whether the fast door can be in a weightless state under the action of the spring to ensure safety performance.

以上就是快速卷簾門的性能的檢查項目注意事項，高質量的快速卷簾門產品性能更有保障，那么就需要我們選擇有保障的實力快速門廠家，更多資訊，歡迎大家聯系關注我們http://m.99feipin.cn更多了解消息！

The above is the inspection items and precautions for the safety performance of the fast rolling shutter door. The safety performance of high-quality fast rolling shutter door products is more guaranteed, so we need to choose professional and guaranteed fast door manufacturers. For more information, please contact us http://m.99feipin.cn Learn more!